Marekani Nasco Sludge Judge ® Lozi Sampuli Bar makaa ya mawe Lozi Detector C09247

Sludge Judge ® - 15 ft. (4.60 m)

Product Number: C09247

Inaweza kwa urahisi, kwa usahihi kuchunguza na kupima chini kuanguka chafu, makosa ya kina 5%, inafaa kwa aina mbalimbali ya kioevu, kutumika kwa viwanda vya matibabu ya maji machafu, viwanda vya kemikali, viwanda vya chakula na aina mbalimbali ya mahitaji ya kuchunguza kwa usahihi hali ya kutenganisha kioevu thabiti. Brand: Marekani NASCO ilipendekeza sekta: migodi ya makaa ya mawe, utafiti wa kijiolojia, viwanda vya matibabu ya maji machafu, viwanda vya kemikali, viwanda vya chakula, nk

NASCO mud sampuli bar iliyoundwa hasa kwa ajili ya kuchukua somo sahihi ya thamani precipitable, maudhui ya thamani ≤5%, inaweza kutumika kwa kila aina ya kioevu, kina chochote. Inatumika mahali popote kama vile viwanda vya usindikaji wa maji machafu, viwanda vya kemikali na viwanda vya usindikaji wa chakula ambapo unahitaji kupima viwango sahihi vya sampuli za precipitation. Ina upinzani wa kutu. Sampuli inaweza kuchukuliwa kwa ounces 3 (89ml / 0.31m) kwa miguu.

Haiwezi kutumika katika kioevu cha joto zaidi ya 165 ℃ (74 ℃) na haiwezi kuvumilia athari ya compressor.

Marekani nasco mud sampuli bar makaa ya makaa mud probe matumizi:

1, polepole kuzamisha chupa sampuli bar chini ya sinki.

A、 Valve floating kufunguliwa na kufanya vitu kuingia. Wakati fimbo ya sampuli ya udongo hufikia chini ya sinki na vitu vya ndani ya bomba vimejazwa hadi ngazi ya uso, vuta kidogo fimbo ya sampuli ili kuinua.

B、 Kufunga kukabiliana na kukabiliana, kufunga mchanganyiko ndani ya bomba.

2, Baada ya fimbo ya sampuli ya udongo kuchukuliwa kabisa kutoka kioevu, idadi ya sampuli imara inaweza kusoma moja kwa moja kutoka kwa ishara iliyoandikwa juu ya bomba. Kuokoa vifaa ndani ya bomba, kwa muda mrefu kushikilia chuma cha chini, unaweza kufungua valve ya kuzuia sampuli.

Mfano kuhusiana:

C09247WA: Kiti, 15-ft. (4.60m)

C09249WA: Mfuko wa vifaa vya sampuli;

Sehemu tofauti:

C09250WA: na valve chini, 5-ft. (1.53m);

C09251WA: Sehemu ya upanuzi wa kati, 5-ft. (1.53m);

C09252WA: Juu ya kamba.

Do NOT use for sampling ethanol or ethanol blended fuel. Use Nasco fuel sampler (B01477).

The Sludge Judge ® is designed to take accurate readings of settleable solids, 5% or less, in a variety of liquids, to any depth. It is ideal for sewage treatment plants, chemical plants, and food processing facilities - anywhere that accurate sample levels of settleable solids in noncaustic materials are needed. The unit holds approximately 3 oz. per foot (89 ml per 0.31 m). The Sludge Judge ® comes in 5 ft. (1.53 m) sections of 3/4 in. (1.90 cm) plastic pipe with screw-type connectors. The top section includes a nylon rope for raising and lowering the sampler. Individual sections can be combined as required to achieve the length needed. Do not use in liquids over 165 ° F (74° C). Sludge Judge ® is not autoclavable. A convenient cotton canvas carrying case that holds four sections, a cleaning brush, cleaning rod, and cotton strips are available.

To use:

1. Slowly lower the Sludge Judge ® to the bottom of the tank. The float valve opens (see figure A), allowing materials to flow in. When the bottom has been reached and the pipe has filled to the surface level, tug slightly on the rope as the unit is raised. This sets the check valve(see figure B), trapping the mixture inside.

2. When the unit has been raised clear of the liquid, the amount of solids in the sample can be read using the 1 ft. (0.31 m) increments marked on the pipe sections. To release the material in the unit, touch the pin extending from the bottom section against a hard surface. This opens the check valve to drain the sample. One-year warranty.